The short answer
Do you run an energy, oil and gas, water, wastewater or food business in the EU? Does it have 50 or more staff, or more than €10 million in turnover and on the balance sheet? Then NIS2 very probably applies to you. It makes cybersecurity a duty of the management team and sets ten areas of security that you must cover. You also get 24 hours to warn your national authority about a significant incident.
If you are smaller, or in a different type of business, it can still affect you through your customers. You can read more about this below.
NIS2 replaced the first NIS directive from October 2024. The first directive covered a small group of the largest operators in each country. NIS2 also covers the mid-sized utilities and food producers that had no cybersecurity regulation before. This is why many organisations ask the question for the first time.
Who is affected
Three questions decide it: your sector, your size, and in a few cases your country.
1. Your sector
NIS2 lists the sectors that it covers. For the operators that we work with, these are the sectors that apply:
- Energy: electricity, gas, oil, hydrogen, and district heating and cooling.
- Drinking water: supply and distribution.
- Wastewater: collection, treatment and disposal.
- Food: industrial production and processing, and wholesale distribution.
NIS2 does not name farms on their own. An agricultural business is in scope when it also processes food at industrial scale or distributes it wholesale. Many larger producers and cooperatives do this.
2. Your size
NIS2 covers medium-sized and large organisations. Medium-sized means 50 or more staff, or an annual turnover and a balance sheet both above €10 million. If you are smaller, you are usually out of scope, but there are exceptions. Your country can still name you, for example if you are the only provider of drinking water in a region.
Size counts for the group, not only for the site. A water company with 40 people can be in scope because a larger group owns it.
3. Your country
NIS2 is an EU directive, so each member state makes its own law for it. The core rules are the same everywhere. Your national law decides who your authority is, how you register, and some of the details. If you operate in several countries, you can have more than one authority.
In Bulgaria: the amendments to the Cybersecurity Act (ЗКС), published in the State Gazette, issue 17 of 13 February 2026, bring NIS2 into Bulgarian law. The national CSIRT is CERT Bulgaria. Its site, govcert.bg, has a form to report an incident under the Act.
Many national authorities publish an online self-check. It tells you if you are probably in scope. It is a useful first step, but the result is guidance, not a legal decision.
Not in scope? Your customers can still ask it of you
NIS2 tells every organisation in scope to manage the security of its suppliers. Do you build control systems, maintain SCADA, supply chemicals, or have remote access into the network of a utility? Then expect security clauses in your contracts, and also questionnaires and audits. The authority does not supervise you, but your customers ask for much of the same evidence.
Essential or important: what the difference means
Organisations in scope are either essential or important. The security rules are the same for both. The differences are how closely the authority supervises you and how large a fine can be.
- Essential: as a rule, large organisations in energy, water and wastewater. The authority can inspect and audit you at any time. Fines go up to €10 million or 2% of global annual turnover, whichever is higher.
- Important: medium-sized organisations in those sectors, and medium-sized or large food businesses. The authority usually acts after an incident or a complaint. Fines go up to €7 million or 1.4% of turnover.
For a mid-sized water or energy operator, important is the most common answer. That is not a reason to wait. The obligations are the same, and the authority checks you after your first significant incident.
What changes
Management carries the responsibility
The management team must approve the security measures, supervise them, and take part in cybersecurity training. If the organisation does not meet the measures, the managers can be personally liable. For essential organisations, the authority can also ask for a temporary ban on a manager who does not do this duty. Security is no longer a task that only the IT department approves.
Ten areas that you must cover
Article 21 lists the measures. They apply to all your systems: the office network, and also SCADA, the PLCs and the control network that run the plant. In plain terms:
- A risk assessment and a written security policy.
- A way to detect and handle incidents.
- Backups, recovery and a plan to keep the operation running.
- Security requirements for suppliers and integrators.
- Security when you buy, build and maintain systems, including patching and handling vulnerabilities.
- A way to check that all of this works.
- Basic cyber hygiene and training for staff.
- Encryption where it is needed.
- Control over who has access to what, and an up-to-date list of your assets.
- Multi-factor authentication and secure communications, including for emergencies.
The measures must be in proportion to your risk and size. A water utility with 120 people does not need a security operations centre. It must know what systems it has, who can access them, and what to do when something goes wrong.
Time limits start when something goes wrong
A significant incident is an incident that seriously disrupts your service or causes real damage. For a significant incident:
- Within 24 hours: an early warning to your national authority or CSIRT.
- Within 72 hours: an incident notification with a first assessment.
- Within one month: a final report.
The 24 hours start when you become aware of the incident, and this can be on a Saturday night. Decide before that who sends the warning, and how.
You have to register
Most countries ask organisations in scope to register with the national authority. You give your contact details and your sectors. Many organisations did not know that this applies to them, so check if you did it.
If you are affected: what to do first
- Confirm in writing that you are in scope. Record your sector, your size including your group, and the countries where you operate. A one-page note with management approval is enough to start.
- Register with your national authority if your country requires it, and save the contact details and reporting form.
- Name an owner at management level. One person accountable for cybersecurity, with the board briefed and the training booked. If you have nobody for this, read virtual CISO or a full-time hire.
- Prepare your 24-hour procedure. Decide who says that an incident is significant, who sends the warning, and who is the deputy. Then test it with a tabletop exercise.
- Find out your position. Look at the ten areas above and mark what is in place, partly in place, or missing. Our readiness check takes about five minutes and does a first review for you. To choose a framework for the work, read IEC 62443 or NIST CSF.
- Fix the most important items first. For most operators, these are: a list of your control systems, remote access with a second factor that is off when nobody uses it, offline backups, and vendor access that you can see and stop.
- Keep the evidence. Approved policies, meeting notes, training records and test results. When the authority asks, you must show what you did, not only describe it.
You do not have to do all of this in one month. Authorities look for a clear picture of your risks, a plan to close the gaps, and visible progress.
If you are the security person
If you already work with ISO 27001 or IEC 62443, most of NIS2 is familiar. These parts often cause problems:
- Management involvement is a legal requirement. You need records of approval and training as well as a policy.
- OT is in scope. The measures also apply to the systems that run the plant. In OT, asset lists and access control usually have the largest gaps.
- Supply chain means your integrators. In our sectors, many incidents start with remote access from vendors. Auditors look there.
- Reporting is a business decision. Agree with management in advance what is significant. Then you do not make the 24-hour decision for the first time during an incident.
Where to start
Take the NIS2 readiness check for a first score in one minute and a full picture in five. If you are not sure if you are in scope, or what to do first, book a 30-minute call. We tell you where you stand and what to do first.
This article is a plain-language summary of Directive (EU) 2022/2555 (NIS2), not legal advice. Check the details against your national law.